FUTO Coaster ALI 110x110mm: Use It on Wood and Glass Tables
By KINTO Japan | Published: 2026-11-03
Category: Guide pratiche
Learn how to place and care for the FUTO Coaster ALI 110x110mm on wood and glass tables, with simple steps to protect your tabletop from heat and moisture.
Quick answer
Use the FUTO Coaster ALI 110x110mm as a protective layer between your drinkware and the table, placing it squarely under the vessel before setting it down. For wood, keep the coaster dry; for glass, check that the linen base sits flat to avoid slipping.
Why the coaster's material matters on wood and glass
The FUTO Coaster ALI is made of 100% linen, a fiber that can absorb condensation and provide a soft cushion. On wood, the main risk is moisture trapped against the finish, so a dry linen coaster helps wick away small amounts of sweat from a cold glass. On glass, the coaster's fabric can slide if the table is polished or damp, so placement and a quick check matter more than with a cork or silicone coaster.
When the coaster is not the right choice
This coaster is not a trivet for hot pans or dishes straight from the oven; its linen construction is designed for drinkware, not high-heat cookware. Also, because linen can shrink and fade with washing, avoid using it as a permanent base for a dripping plant or a bottle that sits for days.
How to use the FUTO Coaster ALI on wood and glass
- Check the table surface: Wipe the table dry and remove any grit before placing the coaster. On wood, avoid leaving the coaster on a damp spot; on glass, make sure the surface is completely dry so the linen does not stick. A dry table is the first defense against moisture rings.
- Place the coaster squarely: Set the 110 x 110 mm square coaster down flat, centered where the drink will go. A common mistake is placing it half on a placemat or edge, which can tip the glass. Keep the coaster fully supported by the table, not bridging gaps.
- Set the drink down gently: Lower your glass or mug onto the center of the coaster. For cold drinks, condensation will be absorbed by the linen; for hot drinks, the coaster provides a buffer but is not a heatproof trivet. Do not slide the glass across the coaster; lifting avoids stretching the linen.
- Check for moisture after use: After removing the drink, lift the coaster and feel the table underneath. If you notice dampness on wood, dry the table and the coaster immediately. On glass, wipe away any condensation that has passed through. Inspect both sides of the coaster after each use on wood.
- Clean and dry the coaster properly: Hand wash or use a very gentle machine wash at 40°C in a net bag, then hang dry in the shade. Do not tumble dry, bleach, or dry clean. Iron on low with a cloth if needed. Air drying in shade prevents shrinking and fading.
Product facts
- FUTO コースター ALI 110x110mm: Measures 110 x 110 mm and weighs about 20 g, made of 100% linen in India. The square 110 mm size fits most mugs and tumblers, while the light weight means it stays put once placed but is easy to lift for cleaning.
FUTO コースター ALI 110x110mm
