TO GO BOTTLE 480ml: Lid, Straw and Drinking Spout FAQ
By KINTO Japan | Published: 2026-11-03
Category: Product Reviews
Answers to common questions about the KINTO TO GO BOTTLE 480ml, including straw replacement, drinking spout fit, lid compatibility, and care for kids water bottle parts.
Quick answer
Use the genuine KINTO TO GO BOTTLE 480ml replacement straws and drinking spout to keep the lid sealing and the straw fitting properly. Match the part to the 480ml bottle, and replace worn silicone or bent straws rather than forcing a generic part.
Why genuine parts matter for the 480ml bottle
The TO GO BOTTLE 480ml lid and straw work as a system: the straw passes through the lid, and the drinking spout seals against it. A generic straw that is slightly too wide or too narrow can leak or be hard to sip, and a poorly fitting spout can cause drips. KINTO lists specific replacement parts for the 480ml and 360ml models, so check the model before ordering.
For families using the bottle as a kids water bottle, replacement parts are often needed before the bottle itself wears out. Keeping a spare straw set and spout on hand avoids switching to a different bottle just because one small part is damaged.
When to replace rather than repair
Replace the straw if it is bent, cracked, cloudy, or difficult to clean inside. Replace the drinking spout if the silicone is torn, stretched, or no longer seals around the lid opening. Small splits in silicone can harbor residue and cause leaks, so replacement is the safer choice.
If the lid itself is damaged, check whether the issue is actually the spout or straw first. The lid is not sold as a separate replacement in the supplied product records, so confirm the source of the leak before assuming the whole lid needs replacing.
TO GO BOTTLE 480ml questions answered
- Which straw fits the 480ml bottle?
- Use the replacement straw set made for the TO GO BOTTLE 480ml (product 1954824). It contains two straws sized for that bottle. Do not trim a longer straw to fit unless the manufacturer instructs it, because an uneven cut can affect flow and cleaning.
- Will the drinking spout fit both the 360ml and 480ml bottles?
- Yes. The silicone drinking spout (product 1954823) is listed as compatible with both the 360ml and 480ml TO GO BOTTLE models, part numbers 20061 and 20071. Check your bottle's part number if you are unsure which model you own. Buy one spare spout if you own both sizes; it covers either bottle.
- How do I know when to replace the straw or spout?
- Replace the straw when it is bent, cracked, or hard to clean inside. Replace the spout when the silicone is torn, stretched, or no longer seals. If the bottle leaks only when tipped, test with a new spout before replacing the lid.
- Can I use generic straws or spouts?
- Generic parts may not match the lid opening or seal correctly. The supplied product records only confirm fit for KINTO genuine parts, so a generic straw or spout is an unverified fit and may leak or be difficult to sip.
- How should I clean the straw and spout?
- Rinse the straw and spout immediately after use, and use a small bottle brush for the straw interior. Separate the spout from the lid for cleaning if your lid design allows it. Allow both parts to air-dry fully before reassembling to prevent odor. Keep a spare straw set so the bottle stays in use while parts dry.
- Are these parts suitable for kids water bottles?
- The TO GO BOTTLE 480ml can be used as a kids water bottle, and the replacement straw and spout are the same parts used on the adult bottle. For young children, check that they can open and close the lid independently, and inspect the straw and spout regularly for chewing damage.
Product facts
- トゥーゴーボトル 480ml ストロー 2本入り: This pack includes two replacement straws designed specifically for the KINTO TO GO BOTTLE 480ml, each measuring φ8 x length (full length not stated in the supplied excerpt). Having two straws means you can keep one in use while the other dries or is being cleaned.
トゥーゴーボトル 480ml ストロー 2本入り - トゥーゴーボトル 360ml / 480ml 飲み口: This genuine replacement mouthpiece is made from silicone rubber and fits TO GO BOTTLE 360ml and 480ml models (part numbers 20061 and 20071). The silicone construction helps maintain a secure seal, and the shared fit means one spare can serve either bottle size in a household.
トゥーゴーボトル 360ml / 480ml 飲み口
