Start With the Vessel, Not the Part
Silicone packings look interchangeable until you compare them side by side. The safest way to order a KINTO silicone packing replacement is to name the vessel first, then match the packing to that vessel's confirmed dimensions and material. A packing sold for a teapot strainer will not do the job of a lunch bowl seal, even if both are silicone rubber.
The catalog lists three replacement packings in this group. Each one names its intended vessel, so you can check compatibility before you buy rather than after.
Confirmed Packings and Their Vessels
- (会員限定)デイオフタンブラー / トラベルタンブラー 500ml シリコーンパッキン(Aタイプ): The member-only Day Off Tumbler is a 500ml travel tumbler that includes silicone packing (A type) in two sizes: small (φ48 × H5 mm, approx. 3g) and large (φ58 × H5 mm, approx. 3.5g). If you are replacing a travel tumbler gasket, this set is the one tied to the Day Off Tumbler, and the two sizes are both included.

(会員限定)デイオフタンブラー / トラベルタンブラー 500ml シリコーンパッキン(Aタイプ) - (会員限定)ワンタッチティーポット/CAST ティーポット シリコーンパッキン: The CAST One-Touch Teapot silicone packing measures 75 mm in diameter and 4 mm in height, weighs about 2 g, and is a replacement part for the strainer/cap assembly. This is the teapot silicone packing to look for when the seal in the strainer/cap area needs replacing.

(会員限定)ワンタッチティーポット/CAST ティーポット シリコーンパッキン - (会員限定)BONBO ランチボウル シリコーンパッキン 2個入り: The BONBO Lunch Bowl Silicone Packing set includes two silicone packings, each approximately 105 mm in diameter and 5 mm in height, weighing about 4 grams each. A lunch bowl packing replacement needs the larger diameter and the two-piece set, which this listing confirms.
How the Three Packings Differ
Compare the confirmed measurements and intended vessel before ordering. The table below uses only the dimensions and materials stated in the catalog.
- Day Off Tumbler packing (A type): Two sizes included: small φ48 × H5 mm (approx. 3g) and large φ58 × H5 mm (approx. 3.5g). Silicone rubber. Intended for the 500ml Day Off Tumbler.
- CAST One-Touch Teapot packing: 75 mm diameter × 4 mm height, approx. 2 g. Silicone rubber. Replacement part for the strainer/cap assembly.
- BONBO Lunch Bowl packing: Set of two, each approx. 105 mm diameter × 5 mm height, approx. 4 g each. Silicone rubber. Intended for BONBO lunch bowls.
A Simple Replacement Check
Use these checkpoints to confirm you have the right part before you remove the old packing.
- Identify the vessel: Note whether you are servicing a Day Off Tumbler, a CAST One-Touch Teapot, or a BONBO lunch bowl. The catalog ties each packing to one of these.
- Match the confirmed size: Check the diameter and height against the listing. The teapot packing is 75 mm × 4 mm, the lunch bowl packing is about 105 mm × 5 mm, and the tumbler set includes small and large sizes.
- Check the material: All three are silicone rubber, which is the material the catalog confirms. The tumbler body material is not specified in the supplied information.
- Follow the care guidance you have: The Day Off Tumbler listing recommends hand washing. The BONBO listing says to follow standard silicone care instructions. The catalog does not supply step-by-step fitting instructions for any of these packings, so work from the part's intended location rather than guessing at a procedure.
What the Catalog Does Not Confirm
The supplied records do not include fitting instructions, removal tools, or a stated service life for any of these packings. They also do not confirm whether a packing from one vessel can be used in another. Treat the vessel name and the stated dimensions as your compatibility check, and do not assume a packing fits a model that is not named in its listing.
If your vessel is not one of the three named here, the catalog information does not confirm a matching replacement. In that case, the safest step is to confirm the model before ordering rather than substituting a packing by appearance.



