How to Replace Your Togo Tumbler Straw Lid

Quick answer

To replace your KINTO TO GO Tumbler straw lid, remove the old lid, clean the rim, and press the new lid firmly until it clicks into place. Always check the silicone seal for proper seating to prevent leaks.

Steps to replace your straw lid

1. Remove the old lid: Twist or pull the old lid off the tumbler. If it's stuck, run warm water over the lid to loosen it. Check for any debris or residue on the rim. Inspect the old lid for damage to confirm replacement is needed.
2. Clean and dry the tumbler rim: Wipe the rim of the tumbler with a clean, damp cloth to remove any moisture, dust, or old seal residue. Dry it thoroughly before attaching the new lid. A clean rim ensures a proper seal and prevents slipping.
3. Position the new lid: Align the new straw lid with the tumbler's opening. Make sure the straw hole is positioned where you want it, then press down evenly around the entire edge until you hear a click. If you don't hear a click, the lid may not be seated correctly.
4. Check the seal: Inspect the silicone gasket to ensure it's fully seated in the lid's groove and not twisted. Gently tug on the lid to confirm it's secure. A twisted gasket can cause leaks even with a new lid.
5. Test with water: Fill the tumbler with water, close the lid, and invert it for 10 seconds. If any water leaks, remove the lid, re-seat the gasket, and try again. Testing with water is the fastest way to confirm a leak-free seal.

Product facts

• トゥーゴータンブラー 480ml 蓋 ストロー用: This replacement lid is designed for the KINTO TO GO TUMBLER, specifically for use with a straw. It provides a secure fit and is made from durable materials. You get a lid that fits your tumbler perfectly, ensuring a snug seal and reliable straw use.